Magic Layers
When the weather turns cold, do you put on more layers of clothing? In Magic Layers, you've got to stack the colored layers in the right places to rebuild the given picture. While it plays like a jigsaw puzzle, there's plenty of room to flex your observation and logic skills as you try to discover the bizarre rules each of the layers take on.
Read More
Alright. 42 is where I give up. :P
Darn! I came here hoping for help with the same level :D
Ahhhhh. I finally got it.
You need to use the "empty" space between and around the numbers.
Two numbers directly over the outline of the 4, one directly over the outline of the 2, two overlapping the right side of the 4, and the remaining two overlapping the right side of the 2.
Me three! Thanks genericgeekgirl - I figured out that
you can put things in the middle
but I was stuck with 43 and 45 because it didn't occur to me that
you make them cancel out on the side too.
I'm afraid that I too give up on 42. I eventually made the 4, but that didn't leave enough for the two.
11. 9 and 7 over 4, 8 over 2, 6 and 3 between 4 and 2, 6 and 5 right of 2
I was really enjoying this one until the "cubes" level. There just wasn't enough room to move pieces around. I realize that is puzzle mechanic here, but I'd like more room to experiment with combinations.
"42" was frustrating but it was my favorite level. I suspect I would have liked the "cubes" even more, but will save it for another day.
I managed to get 43, but not yet 42. :D
Thanks geek girl, your hint helped me a lot!
blazetheshadowfire i just realize i'm dumb.
So stuck on the boxes level... So stuck...
I've worked out that the key is probably
To get all the grey sides in first
but it's still not really helped...
I'm totally stuck on the Tetris level. (After cheating on the '42' level.) Can anyone give any hints, at least?
@Reka:
Start by putting the larger layers into the grid first.
If you take a look at those large pieces, you might notice that they can be divided a certain way...
...such as into two smaller Tetris pieces.
Can you find those two Tetris pieces next to each other in the left-hand picture?
Thank you, Steve! Your hint was perfect, exactly what I needed to figure it out.
Any chance you can give a similar hint for the boxes level? :)
No chance, unfortunately. :( I have deduced this much:
The grey sides (the ones on the "left" of the cubes) are made up of only one layer each. There are only ten of these diamonds among the pieces, and they span nine of the pieces (two appear in the giant star-shaped piece). Of these nine pieces, the only one that can fit in the bottom-left corner of the design is one of the two hexagonal pieces. Yep, that's exactly one piece out of the whole mess.
I've just figured out level 14, and thought I'd share.
I'm going to call the faces 1, 2 and 3, corresponding to the number of layers that face will need to be covered by to get the right colour- eg bottom left is 1, bottom right is 2, and top is 3.
To start:
Starting in the bottom left, there's a little hexagon (as I think everyone's figured out).
Face two of this hexagon is covered by part of the star.
Next- finishing the bottom row of face 1's:
Get the horizontal ribbon-y piece- consisting of a face 2, a face 1, and a face 2. This will sit just outside/underneath the star.
The other hexagon sits inside the bottom right corner :)
Next: filling in ALL face 1's.
Sitting just above/to the right of the star is the pieve consisting of a face 1, a face 2 and a face 3, but only connected in the middle where their corners meet (so, the face 3 sits on top of the star, and face 1 to the right).
The next face 1 on the row is the piece that is vertically symmetrical, with a bit sticking out in the middle towards the right. It is formed of faces (going in order from the top) 3, 2, 3, 1, 3. This sits with it's lower side sitting on top of the horizontal ribbon.
The first face 1 on the next row up is another ribbon-y style piece, going upwards and left. It consists of a face 3, a face 1, and a face 3. This just overlaps the 3-parallelogram piece, and extends over the top of it.
The face 1 to the right is pretty much identical, with an added diamond (face 3) attached by a corner on the bottom right. The top face will overlap the top of the vertically symmetric piece.
At the very top will be the last piece with a face 1- it is almost the same as the vertically symmetric piece, only facing the other way and missing the bottom, so that the faces are (once more going from top to bottom) face 3, face 1 face 3 and face 2.
Next: filling in the rest
I'll do this working my way from the top right to the bottom left.
At the very top you want the piece made of a face 2 and a face 3 together, with a face 3 added on the bottom left. In my opinion it looks a little like a snail crawling towards the bottom left.
Overlapping this is the longest ribbon-y piece, which extends towards the bottom right. It is made of faces (counting from the top left) 3, 2, 3, 2, 3 and 2.
Where this bottom right edge of this ribbon ends, you want it to be met by another ribbon-y piece of the same style, which can reach to the actual bottom right edge so it fits neatly. It is made of faces 2, 3 and 2.
Also meeting the edge of the long ribbon will be the piece made of two arrow looking shapes both facing towards each other. The upper right arrow is made of a face 2 and a face 3 (going from top left to bottom right). Placing this should complete the pattern along the right edge.
Next you want to place the little piece made only of a face 3 and a face 2 right in the middle of the shape. It should cover the last remaining space in the outline (but not complete the pattern).
On top of this is a ribbon-y piece, made of a face 3, a face 2, and a face 3. When you place this, it should turn all 3 faces the right colour.
Now, there are only two pieces left, and you SHOULD be able to figure out where these go. If not...
The last ribbon piece extends from the top right edge of the full outline to the bottom, at the part where these are two "cubes" to span.
The past piece (made of two diamonds- or face 3's) will then complete the pattern by sitting in the bottom left, where the face 3's should be.
I hope nothing I posted was two confusing- it's difficult to describe the shapes and their placements!
And.... Apparently this isn't a unique solution, because the game's not realising it looks the same when I finish. (I got so excited when I'd 'finished' that I never checked this.
Aout, very good job on describing the solution!
Anyone know the contact information for the game developers so we can let them know about the bug?
I found another, slightly different solution to the boxes level (14), and the game *still* doesn't consider it solved.
As you've noticed, each "cube" has three faces. The top face has three layers, the front face has one layer, and the side face has two layers. I'm going to describe what pieces make up the three layers of each top face. I'll go from the top down, so each piece should be placed as low down as it will go and still have a top face in the required position. Hope that makes sense.
Top: top-front-top stairstep; top-side-top-side-top stairstep; top-side stairstep
Row 2 left: top-front-top plus a top floating on the right; top-side plus a top floating on the left
Row 2 right: top-front-top-side (vertical-ish piece with a "flag" on the top right); top-side-top-front-top (vertical piece that's symmetric top to bottom)
Row 3 left: flower (one of each face joined at the corner)
Row 3 middle: top-side-top stairstep
Row 3 right: top-side-top-side stairstep
Bottom row left: sunglasses (two tops joined at the corner); hexagon; star
Bottom left-middle: side-top-side stairstep
Bottom right-middle: X-wing (top-side joined at the corner to side-top)
Bottom right: hexagon
This leaves the horizontal ribbon (side-front-side) with a pretty obvious place to go, just to the right of the middle of the bottom row.
The developer has updated the game to accept the alternate solutions for level 14. For now, you'll need to play the game at the Lysis site to see the update.
Update