Let It Glow 2
This physics puzzle game created by Vyacheslav Stepanov continues the brilliant fun began in the original Let It Glow. Click on objects to remove them to direct the flow of electricity toward a light bulb long enough to make it glow. It's short at only 20 levels and occasionally it involves fickle subtleties in physics law. Yet, besides being very satisfying to play, Let It Glow 2 fulfills your penchant to invent and construct; ergo, this is a shining example of what makes the phuzzle so gratifyingly enjoyable.
Read More6 Comments
Let it Glow 2 Walkthrough
Level 1 -
-
Click on the wooden box to remove it.
Level 2 -
-
Remove the wooden box beneath the transmitter.
-
Remove the large box from the top of the stack at the left.
Level 3 -
-
Remove the bottom board from the stack.
-
Remove the box beside the top transmitter to send it rolling to the right.
-
Remove the board holding the two other transmitters up.
Level 4 -
-
Remove the board beneath the crate at the upper-right of the screen.
-
Remove the small crate beside the transmitter at the top of the screen.
Level 5 -
-
Remove the small crate at the bottom of the screen, beneath the slanted board.
-
Remove the small crate at the top to make the L-shaped board fall over.
-
Remove the board holding the large crate up at the top of the screen.
Level 6 -
-
Remove the small crate directly below the battery to charge it.
-
Remove the left crate to cause the battery to slide down the ramp.
Level 7 -
-
Remove the small crate on the right so the board falls over.
-
Remove the small crate on the right, then immediately remove the small crate on the left.
Level 8 -
-
Remove the small crate on the bottom left.
-
Remove the L-shaped board on top of the transmitter to start it rolling.
-
Remove the board beneath that transmitter to make the transmitter collide with the battery.
-
Once the battery is fully charged, remove the bigger crate from atop the L-shaped board at the right to cause it to swing into the battery and send it rolling backwards.
Level 9 -
-
Remove the middle crate on the bottom layer.
-
Remove the bottom V-shaped board.
Level 10 -
-
Remove the small crate on the right.
-
Remove the small crate beside the transmitter at the top of the screen.
-
Remove the board on the left beneath the large crate.
Level 11 -
-
Remove the large crate beside the stone panel.
-
Remove the board above the L-shaped panel on the left to knock the top transmitter off.
-
Remove the board above the L-shaped panel on the right to knock the second transmitter off.
Level 12 -
-
Remove the small crate just below the battery to charge it.
-
Once fully charged, remove the small bottom crate on the right to start the battery and board falling over.
-
Remove the board when the battery has enough momentum to land on the next platform.
Level 13 -
-
Remove the board holding up the large crate
-
Immediately remove the small crate on the stone panel.
-
Remove the board holding up the transmitter.
-
Once everything stops moving, remove the large crate so the transmitter rolls down.
Level 14 -
-
Remove the small crate below the circular transmitter on the left.
-
Remove the L-shaped board holding back the two wheels.
-
Remove the long horizontal plank so that the smaller board falls on top of the wheels, rolls to the left, and knocks the circular transmitter down. This may take a few attempts!
Level 15 -
-
Remove the L-shaped board on the left, bringing the large crate down.
-
Remove the left small crate beneath the horizontal plank, pushing the vertical plank and crate on the right higher.
-
Remove the horizontal plank at the top right to set off a chain reaction.
Level 16 -
-
In the left bunch of boxes, remove the bottom small right crate to cause the plank to fall over.
-
In the right batch of boxes below the square transmitter, remove the bottom small left crate to cause the transmitter to fall.
-
Remove the longer horizontal plank in the middle and the transmitter will slide down the wheels and land beside the light bulb.
-
Remove the horizontal plank below the circular transmitter.
Level 17 -
-
Remove the horizontal plank below the wooden circle so it drops to the longer plank.
-
When the board teeters to the right, delete the large crate on the right to send it tilting back to the left. When timed correctly, the wooden circle should hop over the gap to the next platform and push the transmitter.
-
Remove the wooden circle once it has pushed the transmitter down to the bottom level.
Level 18 -
-
Remove the small crate wedged between the two larger ones on the left.
-
Remove the wooden circle.
-
Remove small horizontal plank.
-
Remove the large crate in the middle.
-
Remove the long horizontal plank that's holding everything up.
Level 19 -
-
Out of the four planks leaning against one another in the middle of the screen, remove the left most one and the small crate in the middle.
-
Remove the plank holding the transmitter up.
-
Remove the plank holding the battery up.
-
Once fully charged, remove the board below the battery to send it sliding down the brick platform.
Level 20 -
-
Remove the top wooden crate from the bottom pile.
-
Remove the small crate directly beside the battery to start it rolling.
-
Once the battery reaches about halfway, remove the second small crate at the left.
-
Remove the long horizontal plank, lining it up so the battery will fall and wedge itself between the two metal crates.
-
Remove the bottom wooden crate.
-
Remove the bottom L-shaped plank.
No mute button? It's 2012.
Huh, weird. Volume control buttons appear when this is played in Chrome, but not in Firefox (even with Adblock disabled). What's that about?
@LTR
Music and SFX buttons worked fine for me in Firefox, were you zoomed out by chance ?
Interesting, a press of ctrl-+ does zoom it a bit and bring the volume controls into screen with Firefox. Well, apologies for the snotty comment, but now I'm even more intrigued. Why should the zoom level affect how much of a flash window is shown?
@LTR
No idea, I am bubble gum and string fixer not a teckie. All I can figure is zoom zooms the flash window in and out.
Send me back to to my Oric-1 when I understood what was going on :)
Leave a comment [top of page]
Game of the week
Walkthrough Guide
(Please allow page to fully load for spoiler tags to be functional.)
Let it Glow 2 Walkthrough
Level 1 -
Click on the wooden box to remove it.
Level 2 -
Remove the wooden box beneath the transmitter.
Remove the large box from the top of the stack at the left.
Level 3 -
Remove the bottom board from the stack.
Remove the box beside the top transmitter to send it rolling to the right.
Remove the board holding the two other transmitters up.
Level 4 -
Remove the board beneath the crate at the upper-right of the screen.
Remove the small crate beside the transmitter at the top of the screen.
Level 5 -
Remove the small crate at the bottom of the screen, beneath the slanted board.
Remove the small crate at the top to make the L-shaped board fall over.
Remove the board holding the large crate up at the top of the screen.
Level 6 -
Remove the small crate directly below the battery to charge it.
Remove the left crate to cause the battery to slide down the ramp.
Level 7 -
Remove the small crate on the right so the board falls over.
Remove the small crate on the right, then immediately remove the small crate on the left.
Level 8 -
Remove the small crate on the bottom left.
Remove the L-shaped board on top of the transmitter to start it rolling.
Remove the board beneath that transmitter to make the transmitter collide with the battery.
Once the battery is fully charged, remove the bigger crate from atop the L-shaped board at the right to cause it to swing into the battery and send it rolling backwards.
Level 9 -
Remove the middle crate on the bottom layer.
Remove the bottom V-shaped board.
Level 10 -
Remove the small crate on the right.
Remove the small crate beside the transmitter at the top of the screen.
Remove the board on the left beneath the large crate.
Level 11 -
Remove the large crate beside the stone panel.
Remove the board above the L-shaped panel on the left to knock the top transmitter off.
Remove the board above the L-shaped panel on the right to knock the second transmitter off.
Level 12 -
Remove the small crate just below the battery to charge it.
Once fully charged, remove the small bottom crate on the right to start the battery and board falling over.
Remove the board when the battery has enough momentum to land on the next platform.
Level 13 -
Remove the board holding up the large crate
Immediately remove the small crate on the stone panel.
Remove the board holding up the transmitter.
Once everything stops moving, remove the large crate so the transmitter rolls down.
Level 14 -
Remove the small crate below the circular transmitter on the left.
Remove the L-shaped board holding back the two wheels.
Remove the long horizontal plank so that the smaller board falls on top of the wheels, rolls to the left, and knocks the circular transmitter down. This may take a few attempts!
Level 15 -
Remove the L-shaped board on the left, bringing the large crate down.
Remove the left small crate beneath the horizontal plank, pushing the vertical plank and crate on the right higher.
Remove the horizontal plank at the top right to set off a chain reaction.
Level 16 -
In the left bunch of boxes, remove the bottom small right crate to cause the plank to fall over.
In the right batch of boxes below the square transmitter, remove the bottom small left crate to cause the transmitter to fall.
Remove the longer horizontal plank in the middle and the transmitter will slide down the wheels and land beside the light bulb.
Remove the horizontal plank below the circular transmitter.
Level 17 -
Remove the horizontal plank below the wooden circle so it drops to the longer plank.
When the board teeters to the right, delete the large crate on the right to send it tilting back to the left. When timed correctly, the wooden circle should hop over the gap to the next platform and push the transmitter.
Remove the wooden circle once it has pushed the transmitter down to the bottom level.
Level 18 -
Remove the small crate wedged between the two larger ones on the left.
Remove the wooden circle.
Remove small horizontal plank.
Remove the large crate in the middle.
Remove the long horizontal plank that's holding everything up.
Level 19 -
Out of the four planks leaning against one another in the middle of the screen, remove the left most one and the small crate in the middle.
Remove the plank holding the transmitter up.
Remove the plank holding the battery up.
Once fully charged, remove the board below the battery to send it sliding down the brick platform.
Level 20 -
Remove the top wooden crate from the bottom pile.
Remove the small crate directly beside the battery to start it rolling.
Once the battery reaches about halfway, remove the second small crate at the left.
Remove the long horizontal plank, lining it up so the battery will fall and wedge itself between the two metal crates.
Remove the bottom wooden crate.
Remove the bottom L-shaped plank.
Posted by: Alex
|
January 21, 2012 8:56 AM