I can't seem to get it to come up at all....keep getting a "timed out" error

Reply

typekeyed now finally, anyway, I can't get the game to come up at all, keep getting a "timed out" error :/

Reply

Really stuck on level 7. Where should the circles go? Any help please

Reply

algerian

Full Walkthrough

First click the upper right button and remember the order the arrows light up. Next draw on one of the row of arrows to see a ghost of it move across. Now what if the arrows lit up while it was moving across. To move the blue thing connect a line from it to one of the other squares. To draw an arrow...draw an arrow.

Reply

Mandy

For the backround circles you need to move them so that each of there two bars are empty. Then you need to move the wrench barsso that each of the joints are over the backround circles. then you should have the code number.

I want to add something. The CDT that was first featured on here was CDT2. not the original CDT

And I might do what I think of each puzzle

CDT
1. I rember the first public version of this. IT's facelift is a great improvement.
2. It took me quite awhile to get this but the solution was quite ingenious.
3.Very smart. I got this one quickly. But I hate hoe long and fast the voice talks.
4.My person facorite of the original CDT. It took me awhile but I eventually figured it out, and boy did I love it.
5.I figured out how to make the colours almost immediatly but it took me awhile for the shapes.

CDT2
6.The original preview for CDT2. I knew what to do but I couldn't figure out how to get the shape and put the nails so it stayed together
7.My favorite CDT2. At first I didn't notice about how the joints worked.
8.I got this one instantley but it was just so tedious
9.I love this one. I got it last in CDT2 because I didn't know you could move the pannel.
10.Took awhile but I eventually peiced it together

CDT3
11.Ugh. Took so long to find the right letters.
12.My Favorite of them all. It was incredibly clever but I think having to put the letter in the lock at the end was unnecerary
13.I really liked the simplicity but it was to easy to solve.
14.real smart. took me awhile to get it 'cause I didn't know that the bars themselves would move.
15.ACK. I knew what to do instantley on this one but setting the steering right was soooooooooo annoying

Reply

Cant do 14 plzz help can u like send print screen of it you can upload a photo here
www.imageshack.us
and post the url here thank you!!!!!!!!

Reply

Just a note about puzzle 14.... sometimes when you draw the directional arrow, the game doesn't recognize what you drew and just leaves it blank on the blue square. I thought I had the whole thing wrong before I realized I was just sloppy lol

Reply

can someone post a link to a picture of the solution to 14 plz!!!!

Reply

walkthrough for #8 please

Reply

nevermind figured it out walkthrough for 9 please

Reply

nvm figureede that out to walkthrough for #10 please

Reply
No-Names-For-Me September 12, 2006 12:08 PM

For Number 11,

You must first move the 4x4 square to the left, and click each box so the imgage disappears. Now you can see 2 yellow strips, one going vertical one going horizontal. and you can see that thers 4 letters at the top and 4 at the right. move the horizontal yellow strip to the top and the vertical to the right (not covering the letters). hover over the first letter at the top (D) and an image appears. now on the 4x4 square on the far left side of it click the 4 boxes till u find that image (make sure its only that image on that vertical line). Now do the same for the 3 other letters. Now the big board comes to play. Place the image in the 4x4 square on the far left over every D square on it 1 at a time. Look at the next image and see if it covers a C, then the same for an A, and then a C again. If they dont all cover the correct letters then move onto the next D. When you find it use the colours under the images on D,C,A,C and place them in the yellow strip at the top. Then follow this for the right hand side yellow strip and when u finish it, the level will be complete, if not then u have the colours wrong so do it again.

Reply

I loveed CD1 & 2 but this release has far too many bugs.
If you don't "cheat" by looking up advice online you can
spend hours trying to figure out the next right move some
random bug has made it impossible or unfathomable -
especially when the "correct" solutions are so vague
anyway that a bug appears to be a gameplay feature.

Reply

Final time for me was 27m19s...anyone beat that? Not trying to brag, inspired solely by idle curiosity.

Reply

why is 8 kicking my butt. Every time I try to place a board, it disappears. HELP!

Reply

how do you solve puzzle 9? >_

Reply

excuse me, need some help with number 10... Could someone help me? :(

Reply

Wow, finally finished the puzzles, took me 1:51:38, only because a bunch of the puzzles were broken for me, and I spent a lot of time trying to solve them with missing pieces.
#2 - I didn't have sound on.
#6 - There were no wood pieces, and I could not move the nail gun.
#8 - The log only appeared one time, and never came back.
#9 - The slider didn't move anything on the grid.
#10 - The colored cards were missing.

Hints for #10:

Listen to the correct song on the left, and try to match that with the pieces on the bottom.

After you get the bottom song to play in the correct order, match the shape of the pieces with their colors from the cards.

Take the shape of the first piece of the song (along bottom), match it to a color (from the cards), and then change the first color block on the left to the matching color.

Reply

I want to try to play it, but my Internet connection is too slow. Is the size of the flash large?

Reply

Keith - the game file is about 1.6MB in size.

Reply

I finished 11, took some time, but did it. The remaining puzzles, i figured out what has to be done, but the puzzles were too cumbersome and time consuming. Well and i was too lazy to try again. But great job Andy... when do we get the next lot? I'm waiting eagerly.
thanks Mate for CDT3.
Oh yeah! and one more thing.. your "Behind the scene" is good and yes THE MALE VOICE in the phone puzzle and the slider puzzle is extremely annoying. LOL.

Reply

please just tell us what exactly to do for 14

Reply

Ok, I'm completely stumped on 9. The slider slides the bars back and forth, but I can't get them to do anything else. Clicking, draging, nothing works. Is it bugged?

Reply

For puzzle 9:

Each square passes over other squares.

Each square can have only one color.

Reply

Here two clues for puzzle #8 (boards/planks/logs/...)

Me :

Red Xs are bad.

frustr8d :

Clicking on the red band in the middle of a board will make it disappear.

Reply

IMHO:

#11 was a bit too complicated with the two different puzzles in the same 4x4 square, but easy once I got that.

#12 was a bit difficult but fun once you figured out the beginning part.

#13 was by far the easiest out of all of them (in CDT3).

I never really did 14. I mean I figured out how to do it, but actually moving the cursor around on the grid was way too hard and frustrating to actually sit and do. (Kudos to those of you who actually sat and did it.) If there was an easier way to make the cursor move around the grid, #14 would have been great.

#15 was a very unique, good puzzle to solve.

I liked these puzzles - keep them coming!!

Reply

Do any of you know where I can find a complete walkthrough of this game

Reply
egrey jakoman October 1, 2006 9:07 PM

i dont get 15 everytime i get the green and it turns purple, the thing disapears

Reply
SlvrLegnd October 5, 2006 2:07 PM

What's up with #13??? I have everything in the correct order, see inside spoiler tag below for more on that, but it won't light up the green arrow and let me finish the puzzle. Am I missing something here?

I charged up the battery, and started rearranging the blocks into the following order from Top to Bottom:
1. Green/Yellow
2. Yellow/Blue
3. Blue/Red
4. Red/Aqua
5. Aqua/Pink

Is there anything else I need to do, or am I posting a bug?

Reply
mars25225 October 8, 2006 2:24 PM

i need help on 11 it doesnt do anything when i put the colors in the batteries

Reply

Im stuck on 9, could somebody please help?

Reply

Hey! Awesome puzzles. I loved them (and hated some of them, cause I couldn't get em!). I'll look forward to set 4 ;p

Reply

#14 much more clear spoiler.

First, circle the "hint" button in the upper right.
There are four sets of shapes. These will flash. Note the order in which they flash.
For example, when I did the puzzle, the left-most set of symbols flashed in this order: 3412. The topmost flashed in this order: 2341
If you click on the bars with the symbols, the bars will move across the screen in a certain direction.
In the empty grid, one of the squares is highlighted blue. You can move it around by dragging a line from where it is to an adjascent square.

To solve:

Start with the leftmost bar. Find the symbol that flashed first. Move the blue highlight cursor to the first square in that row. Draw that symbol that flashed first in that square.
In my example, the 3rd row flashed first. The leftmost bar goes from left to right, so I drew that symbol into the first column of row 3.
Find the symbol that flashed second. Move the blue cursor to the 2nd square in THAT row. Draw the symbol that flashed second in that square.
repeat until you have 4 symbols in the grid for the 4 symbols in the leftmost bar.

The rightmost bar travels right to left, so "1" in the rightmost bar means the last column, 2 means the next to last, etc.
The same inverse logic goes for the bottom bar as compared to the top.

This is complicated to explain without a video or something.

Reply

Clue: Be Quick

Reply

I've got all the levels done except 7

I have put the circles in the correct locations (they all turn blue), I moved the arms over the circles, (the lock turns to an arrow), but if I press the arrow, it doesn't do anything. Nothing shows up as far as a code to go in the white box under the arrow. Is this a bug? I'm using IE 6.0.2800.1106 to play.

Reply

Hooray!!!!!!!!!! beat lvl 5

Reply

i was playing level 12, and one of the plugs didn't have a cord, a little glitch

Reply

in level 13 , how do i drop the blocks without them breaking?

Reply

ALL RIGHT!! I beat level 14!!

Reply
Eli Sherer October 15, 2006 4:17 PM

Complete Walkthrough (no hints just plain solution):

Level 1:

098701

Level 2:

2,3,9,0

Level 3:

03161987

Level 4:

2,10,5,9

Level 5:

*just get the thing done*

Level 6:

the square is on the left center and the large one is on the right bottom

Level 7:

make the digit "2"

Level 8:

from the top: 140,60,100,100,220,260

Level 9:

B-Blue,G-Green,O-Orange,Y-Yellow...
BOBGY
GBOBC
CRY
BGYPCRYO
BC
YGBO
OYRCP

Level 10:

star,x,triangle,square,half,circle

Level 11:

GYBB,GYRY on the battarys

Level 12:

7 to 1,5 to 5,4 to 7,3 to 2,1 to 6. and it's 5

Level 13:

rearrange the squares bottom to top purple to green

Level 14:

hit the hint and cross that information with each movement of the bars each bar make 4 signs on the board.

Level 15:

Green,Pink,Yellow,Orange,Purple

Reply

SlvrLegnd:
you need to push the little green arrow at the top left once they are in the right order

Reply

Im stuck on level 6, i know how to do everything, like move the nailgun, move the wood, fire the nailgun, and bring down that little crane thing!!!!!!!!!! Can I have a little Hint??????????

Reply

WOW LEVEL 11 WAS HARD!!!!!!!!!! but i beat it. i will never share my secrets!!!!!!!!!! muahahahaha!!!!!!!!!! (if you really need help you can email me at jacobsteffler11-95@sbcglobal.net)

Reply

Does number 5 have anything to do with the rods?

Reply

We're really stuck on puzzle 8, we've got all of the logs in place - they're all green and right, but the last one wont work!!! It just wont go green! What shall we do?
thanks bbz xxx

Reply

looked at eli sherer's walkthrough but I dont get any of it help me please

Reply

OK I have only number 12 to go..I understand with the numbers making the light bulb light up, but I dont understand what to do with the bars, and the little black things that are on each side.Help please, I am soo close, and this one is driving me crazy!

Reply

I seriously need help for 7, anything?

Reply

Level 7

line up circles using the red level meters. When all the reds goneplace circle there and it should turn blue. once you have all the circles placed correctly, make a 2 with the arms and then type it in the box and your done.

Reply

I'm stuck on 5 I know how to do it I just don't know how to make it be over. when i press the check button nothing happens

Reply

Argh! I got a taste of the fun from numbers 11 and 12, but number 13 crashed the program and now I can't get back to it. :(

Reply

Yes! I finished them. I absolutely love these...

MORE! (Please)

Reply
BoboTheBear November 8, 2006 11:47 AM

On that frustrating Level 12 *bug* ...

I actually thought it was a design feature at first, bracketing where you were allowed to put the black stops, and forcing you to carefully figure out the order in which you could light up the LEDs. (I think it makes for an even more clever puzzle this way.)

Once I realized that

You only need to set one black stop - the bottom one - and the length of the white bar does the job of the second stop.



I was able to solve the puzzle, even with the bracketing glitch, in this order:

Labeling the left and right columns L1-L7 and R1-R7 (top to bottom), I did:
1) Set the black stops to L7 and R7.
2) Connect L7 to R1 from the left.
3) Connect L3 to R2 from the left.
4) Connect R7 to L4 from the right.
5) Connect R6 to L1 from the right.
6) Connect R5 to L5 from the right.



Enjoyed all 15 puzzles. Keep 'em coming, Andy!

Reply
millzipops November 11, 2006 3:15 PM

hey can someone help me with level 4 please???

Reply
highwire4521 November 13, 2006 12:51 PM

yo i finished click drag type 2 in 20 minutes

Reply

2:48:20 and still have #14 unsolved... :/ Bad luck

Reply

i dont get the first 1 !!!! i no i no im dumb i just dont get haw u make the key go up i can make it go down .....:S

Reply

Man I can't figure out the one that looks like a chain contraption!!! any hints?!?

Reply

ryan first of all you cant make it go up and second you have to put it in every time you click on it

Reply

Can someone send me a image how to do 6 and 15

(it's a good idea to hwho have problems like me.)

Have problems with 14?

Do something like this:
^ > >VV>
^^>
How do you do this?

When you click on the right-up corner, I copy what number is the 1st, 2nd, 3rd and 4th. Then I put the positions with the place(I don't write very well because I'm Brazilian)

Reply

frust8d. Are you click the red strip in the middle? If yes don't.

Reply
Eric R. Pires December 11, 2006 6:10 PM

Joey does CDT3 in 27m19s. I do everything in 20m03s! Haha! Nobody beats me!

Reply

Can someone help me with #9? I get that the slider moves but is there a order or something? or do I have to move pieces?

Reply

I can't even start the game! How do I get it to go?

Reply

emily - Be patient while it loads. It will show a blank screen for a bit. Did that help? Or are you experiencing a different problem?

Reply

Ahem!

I suck at this game!

Stuck on level 1.

Reply

plz i have only done
1,2,3,4,5,8 i did finish 15 but my computer crashed and i had to start again

please will sum1 give me a walkthrough on any of these

Reply

ummmmm help... if someone could explain with clear detail to solve 12 please do...

Reply

Answers:

#1

870901

#2

2390

#3

03161987

#4

Green box-2 Red box-10 Blue box- 5 Yellow box- 9

#5

NO NUMBERS… move mouse over green top at top and click on the key and move magnifier glass over the four boxes… see the colors and shapes it shows? Match those up by taking either the red, blue, or yellow bars and putting it into the machine to the bottom right to make those colors… EXAMPLE-- if the color shows up purple in one of the little boxes under the magnifier glass than insert the red and blue bars into the machine…-- then click one the boxes on the machine to make Xs so those boxes do not turn the color you've created move the box in the middle and put it into the machine… then move it into the machine at the top and match the shapes the magnifier glass shows…. That's the best I can explain it

#6

I cant explain this one…. Sorry find somewhere else they explain it a lot better than me

#7

okay move the circles until the bars above them become clear and unclick it and it should turn blue.. . After all five circles are in their place the arms and move them to fit the circles it should form a 2 after that the lock at the bottom right should turn into an arrow type 2 in the white box and click the arrow

#8

rearrange the gray boxes so the dark gray parts coming out of it and point to boxes… none pointing at nothing then cut the wood to fit between the gray boxes to inter- connect them then click on the green arrow

Reply

Yay, I beat it with a time of 2:35:13 ☺ I guess some people just take longer.

Reply
Randy Ruston December 28, 2006 11:03 AM

These are NOT hints but last resort full answers to each puzzle.

Puzzle # 1

The "recycle" icon is when you mess up the key and need a new one. Drag the key into the box which will open. Shave down the key so that it lines up to either side. This will open the box below. Drag the sliders on the outside edges so the transparent box forms over the "empty" box to get each number. Type in the numbers from left to right in the white area, then click the green arrow.

Puzzle #2

In this puzzle, you must have the sound on. The red dial is for the even numbers and the blue is for the odd numbers. When the lock is closed you are able to turn your dial Right Blue - 1, Left Red - 2, Left Blue - 3, Right Red - 4. Unlock the lock and bring either the red dial or blue dial to the other side to mute it. Then lock it again. Turn the dial that is audible to one side or the other. Listen to the calculation and type what the answer is to the corresponding number on the bottom. Turn the dial for the other number. Repeat this process for the other dial. When this process is done, click on the green arrow.

Puzzle #3

On the left side of the puzzle area are four circles with colours. Drag all the circles to the top of the screen. Take note of one colour and drag it down to the bottom. It will change into the colour it needs to be attached to. click and hold on the first coloured wire that represents the top colour and draw a line to the corresponding coloured wire on the bottom. Repeat this process till all wires are connected. If a mistake has happened or you need to redo, use the wire cutters to erase ALL wire drawings. If done correctly the phone will ring. Drag the receiver to desired volume and wait for a pause in numbers. The number right after the pause is the first number in sequence. Place these numbers in the white box and click green button.

Puzzle #4

Drag one of the "eye glasses" around the patterned area to look for "tabs"; Square, Circle, Triangle, and X. In the bottom left area you can drag a little leaver left or right to set to "Move" or "Turn". Use this to adjust the squares so that the tabs on the outside match the tabs on the inside. When they are matched, drag the eye glass around the area that matches the colour of the tabs. This will form a number. Place the number in the corresponding colour in the lower right corner. You will notice that the red input area has 2 underscores. This indicates two digits in the number. Repeat this process till all numbers are entered and then hit the green arrow.

Puzzle #5

At the very top is a half circle with a green dot in it. Just move your mouse over this area. A sliding menu will open on the left side with a key and check mark icon. Click on the key icon to get an eye glass. Bring the eye class to the four-square object. Click on screen to get rid of eye glass. The "mechanical" box in the lower right corner is to paint the colours onto the four-square object. To select what square does not receive the colour, click on a green machine empty square to have them turn to an X. Only the green machine squares that are blank will receive colour. To add colour, which the machine will use, place a canister (Red, Blue, Yellow) that you need near the left side of the machine near the tube. It may be necessary to place two colours to combine them to make a combined colour; Red/Blue - Purple, Red/Yellow - Orange, Blue/Yellow - Green. When you have the colour(s) inserted place the four-squared object at the top of the green machine. The top blue machine is a cutter. The dark right angle lines represent the square to be cut, and the lighter line connecting them is the cut it will make. If there is no line, then the square is removed (don't worry, the square isn't gone. You can put the square back with the cutter.) To rotate the square to be cut, click on the curved arrow tips. To change the shape of the cut, click within the grey square border. When desired shape and square to be cut place the four-square object on the left side of the machine. You will need to do this a few times to get the right shaped "key". When you are done and match the eye glass example, click on the check mark instead of the key.

Reply

did all but 15...don't have nearly enough patience for that.

Reply

*screeches at it*
LOAD DARN YOU!

Reply

I understand how to do level 8. But I don't know how to connect horizontal boxes. Help? Is there some way to rotate the planks?

Reply

Woo!! 1:13:51 wasted at work tonight! Thanks Andy.

Reply

Okay, I think I know how to beat #15...Just run robot over...

Green Pink Yello Orange then Blue

but then I run out of time everytime!!! What do I do??

Reply

Ack!! I've done every puzzy without ANY help and now I turn to this because I'm frustrated...I spose if I could do everything else I should be able to do #9...But maybe my brain isnt working the way needed to solve this! Can someone give me clues/hints on how to do this?

Reply

Please could you help me with 14, I know what to do (and reading the spoilers confirmed my suspicions) but I can't move the blue highlighted square, whenever I try to move it (draw a line in a certain way) it moves all the way to that direction, so I can only change the squares in the corners.

Reply

I hate #15!! I've done them all except this one now. I understand what I have to do, but the "skill" involved is just too much for me.

Are there any more games like this? This was fun and clever. Great game.

Reply

please describe number 6

Reply

Ok so 'm just way to slow to finish 15 I can't get the robot to go faster through all the colors. I give up

Reply

I HATE THIS i can do all xept 12 13 14 15 plz give fully explained walkthrough. I need it NOW!!!!!!!!!!!!!!

Reply

HELP! i understand what to do on fifteen but i run out of time... is it a glitch? please someone help!

Reply

Here is a walkthrough compiled from selected comments

Puzzle #1

  • The "recycle" icon is when you mess up the key and need a new one.

  • Drag the key into the box which will open.

  • Shave down the key so that it lines up to either side. This will open the box below.

  • Drag the sliders on the outside edges so the transparent box forms over the "empty" box to get each number.

  • Type in the numbers from left to right in the white area, then click the green arrow.

Puzzle #2

  • In this puzzle, you must have the sound on.

  • The red dial is for the even numbers and the blue is for the odd numbers.

  • When the lock is closed you are able to turn your dial Right Blue - 1, Left Red - 2, Left Blue - 3, Right Red - 4.

  • Unlock the lock and bring either the red dial or blue dial to the other side to mute it.

  • Then lock it again.

  • Turn the dial that is audible to one side or the other.

  • Listen to the calculation and type what the answer is to the corresponding number on the bottom.

  • Turn the dial for the other number.

  • Repeat this process for the other dial.

  • When this process is done, click on the green arrow.

Puzzle #3

  • On the left side of the puzzle area are four circles with colours. Drag all the circles to the top of the screen.

  • Take note of one colour and drag it down to the bottom. It will change into the colour it needs to be attached to.

  • Click and hold on the first coloured wire that represents the top colour and draw a line to the corresponding coloured wire on the bottom.

  • Repeat this process until all wires are connected.

  • If a mistake has happened or you need to redo, use the wire cutters to erase ALL wire drawings.

  • If done correctly the phone will ring.

  • Drag the receiver to desired volume and wait for a pause in numbers. The number right after the pause is the first number in sequence.

  • Place these numbers in the white box and click green button.

Puzzle #4

  • Drag one of the "eye glasses" around the patterned area to look for "tabs"; Square, Circle, Triangle, and X.

  • In the bottom left area you can drag a little leaver left or right to set to "Move" or "Turn". Use this to adjust the squares so that the tabs on the outside match the tabs on the inside.

  • When they are matched, drag the eye glass around the area that matches the colour of the tabs. This will form a number.

  • Place the number in the corresponding colour in the lower right corner.

  • You will notice that the red input area has 2 underscores. This indicates two digits in the number.

  • Repeat this process till all numbers are entered and then hit the green arrow.

  • Clarification (thanks SkylerF!): Grab the red lens. On the tiles, you will see red lines, while the border markings are a different color. Using the red lens, get those markings lined up. Grab the lens with that color. NOW you will see a number.

Puzzle #5

  • At the very top is a half circle with a green dot in it. Just move your mouse over this area. A sliding menu will open on the left side with a key and check mark icon.

  • Click on the key icon to get an eye glass.

  • Bring the eye glass to the four-square object.

  • Click on screen to get rid of eye glass.

  • The "mechanical" box in the lower right corner is to paint the colours onto the four-square object.

  • To select what square does not receive the colour, click on a green machine empty square to have them turn to an X. Only the green machine squares that are blank will receive colour.

  • To add colour, which the machine will use, place a canister (Red, Blue, Yellow) that you need near the left side of the machine near the tube.

  • It may be necessary to place two colours to combine them to make a combined colour; Red/Blue = Purple, Red/Yellow = Orange, Blue/Yellow = Green.

  • When you have the colour(s) inserted, place the four-squared object at the top of the green machine.

  • The top blue machine is a cutter. The dark right angle lines represent the square to be cut, and the lighter line connecting them is the cut it will make. If there is no line, then the square is removed (don't worry, the square isn't gone. You can put the square back with the cutter.)

  • To rotate the square to be cut, click on the curved arrow tips.

  • To change the shape of the cut, click within the grey square border.

  • When desired shape and square to be cut place the four-square object on the left side of the machine. You will need to do this a few times to get the right shaped "key".

  • When you are done and match the eye glass example, click on the check mark instead of the key.

Puzzle #6

  • boards: In order to correctly build that shape, you'll have to slide the lowermost rectangle to the top left.

  • nails: You've only got four nails to hold it all together, but fortunately you can pull and redo nails. You can check your work by clicking boards - connected boards highlight and move in unison.

Puzzle #7

  • Line up the circles using the red level meters.

  • Move the circles until the bars above them become clear, unclick it and it should turn blue.

  • Once you have all the circles placed correctly, form a 2 with the arms.

  • After that the lock at the bottom right should turn into an arrow.

  • Type 2 in the white box and click the arrow. You're done.

Puzzle #8

  • Rearrange the gray boxes so the dark gray parts are coming out of it and point to boxes.

  • Make sure none are pointing at nothing.

  • Then cut the wood to fit between the gray boxes to interconnect them.

  • Then click on the green arrow.

Puzzle #9

  • Grab the cover plate to the left of the plunger and slide it right to reveal the paintbox.

  • If the plunger causes two boxes to slide over each other, paint those boxes the same color.

Puzzle #10

  • Listen to the correct song on the left, and try to match that with the pieces on the bottom.

  • After you get the bottom song to play in the correct order, match the shape of the pieces with their colors from the cards.

  • Take the shape of the first piece of the song (along bottom), match it to a color (from the cards), and then change the first color block on the left to the matching color.

Puzzle #11

  • You must first move the 4x4 square to the left, and click each box so the imgage disappears.

  • Now you can see 2 yellow strips, one going vertical one going horizontal, and you can see that there are 4 letters at the top and 4 at the right. Move the horizontal yellow strip to the top and the vertical to the right (not covering the letters).

  • Hover over the first letter at the top (D) and an image appears. Now on the 4x4 square on the far left side of it click the 4 boxes till you find that image (make sure its only that image on that vertical line).

  • Now do the same for the 3 other letters.

  • Now the big board comes to play. Place the image in the 4x4 square on the far left over every D square on it 1 at a time.

  • Look at the next image and see if it covers a C, then the same for an A, and then a C again. If they dont all cover the correct letters then move onto the next D.

  • When you find it use the colours under the images on D,C,A,C and place them in the yellow strip at the top.

  • Then follow this for the right hand side yellow strip and when you finish it, the level will be complete, if not then you have the colours wrong so do it again.

Puzzle #12

  • The objective is to make a number on the right that is missing in the box in the upper, left.

  • The missing number is...5

  • You can use the lightbulb to see which points make a connection to light a line.

  • The length of a bar determines how "diagonal" the cable will be.

  • Work you way from the bottom of both side to the top. As you sometimes cannot drop the "cursor" below existing bars.

  • Immediatly delete bars that do not belong to the 5 by clicking on them.

Puzzle #13

  • Click the dark dot in each dial to rotate that dial, each dial moves something.

  • Drag the lever at the bottom to connect/disconnect the circuit.

  • The battery dial reads low. Circuits need power...

  • The piston is an electro magnet.

  • The gradient boxes look like they need to be put in a different order.

Puzzle #14

  • First, circle the "hint" button in the upper right.

  • There are four sets of shapes. These will flash. Note the order in which they flash.

    • For example, when I did the puzzle, the left-most set of symbols flashed in this order: 3412. The topmost flashed in this order: 2341

  • If you click on the bars with the symbols, the bars will move across the screen in a certain direction.

  • In the empty grid, one of the squares is highlighted blue. You can move it around by dragging a line from where it is to an adjascent square.

  • To solve:

  • Start with the leftmost bar. Find the symbol that flashed first. Move the blue highlight cursor to the first square in that row. Draw that symbol that flashed first in that square.

    • In my example, the 3rd row flashed first. The leftmost bar goes from left to right, so I drew that symbol into the first column of row 3.

  • Find the symbol that flashed second. Move the blue cursor to the 2nd square in THAT row. Draw the symbol that flashed second in that square.

  • Repeat until you have 4 symbols in the grid for the 4 symbols in the leftmost bar.

    • NOTE: The rightmost bar travels right to left, so "1" in the rightmost bar means the last column, 2 means the next to last, etc. The same inverse logic goes for the bottom bar as compared to the top.

Puzzle #15

  • Your goal is to make the big multi-color round travel, in a specific order, to intersect with each of the smaller colored circles.

  • The first color you need to visit is indicated in the round.

  • When you visit the first, you'll get the second.

  • The columns on the left and right are for you to direct the round.

  • Work from top to bottom inside the columns.

  • You'll need to "paint" the columns with intermittent color. (A little red here, a little purple there.)

  • The width of the line you paint inside the column, determines the angle of turn.

Reply

need some help on #10!! i did arrange the bottom pieces(the song plays correctly)..and matched the colours!!! what next? :)) i clicked on every arrow...nothing seems to work :(

Reply

Question about #14. I understand everything I have to do, but I don't understand

when I try to move the blue box it will only go to the four corners. I can't get it to go to any other box. Can anyone explain why?

Thank you.

Reply

oh my gosh! can someone please help me on #6?!?

I put all the boards together, they're all connected, and I press the arrow on top and the thing (whatever it is) comes down. Then, NOTHING! All the nails come out and the crane thing stays there for a couple seconds. Then it goes away and that's all I can do!

can anyone at all help me get past this one spot please???

Reply
Katie (also KT) June 2, 2007 8:23 PM

ok wait, i think i figured this out:
is this right??
here it is:

ok...you know where you click to remove all the nails? it has that weird shape on it, until you run your mouse over it. does the shape of the boards have to match that shape??

i think this is right, but i'm not sure if it is... and also not sure if i'm able to do it! haha... also, if this is right, i hope it helps other people stuck on this level!

Reply
Katie (also KT) June 2, 2007 8:42 PM

oops....never-mind
my dad figured it out!
but thanks anyway!

Reply

haha it took me:

17:53:58
haha i had it running all night though.... ;)

:D lol

Reply

I beat it!!!
3:55:53
Most of the time I was just sitting there thinking.

Reply

what about Click Drag Type 2??

Reply
Juan henry June 12, 2007 7:23 AM

lol noobs. beat it in 17.57 mins. just read those answers
it might help

Reply

In # 14 the board doesn't flash for me. I tried it in Firefox and in IE but nothing flashes when I hit the hint button...

Otherwise I played them all and I really enjoyed it! I look forward to more!

Reply
Anonymous July 15, 2007 10:32 PM

my time the 1st time was 5 hrs. 15 mins. the 2nd time was 15 mins. 50 sec.

Reply

On puzzle nine I slide the plunger on the right side up and down but the boxes won't move... what's the deal?

Reply

So just to check...no Click Drag Type 2?

Reply

The game we have up as Click Drag Type is actually the Click Drag Type 2.

However, each Click Drag Type game has included ALL of the puzzles from the previous versions, so all you really need to play all the puzzles in the Click Drag Type series is this one, Click Drag Type 3. =)

Reply
a nony mouse July 30, 2007 7:25 PM

I can't get the game to even show up on the screen right; it's all overlapped and blank.

Reply

Screen shot, nony mouse? I have no idea how to help with just that little bit of information.

Reply